Kitchen materials library
130 finishes for kitchen doors, worktops, drawer fronts and profiles in glass, stone, wood, metal, lacquer and technical surfaces. Compose a moodboard of up to six and see the real samples at the Wakim Group showroom in Saifi, Beirut.
Create your own moodboard
Pick up to six kitchen materials from the library below. Each one is laid on the board as a sample piece beside the others, so you judge the combination, not a single colour. Save the board or send it on WhatsApp with its codes, then see the real samples in Saifi.
Tap a piece on the board to open the finish.
The board is empty. Tap + on any sample in the library, or open a finish and choose Add to moodboard.
130 finishes
Glass 36
Tempered glass doors in gloss, matt, waved (Onda), patterned, tactile, textile and smoked (Velato) finishes. Vitrum glass is five times stronger than ordinary glass, easy to clean, and its colour does not change over time. MVi adds coloured mineral, transparent elements or real metal into the glass.
Stone and ceramic 27
Marble, granite and sandstone cut to a 5 mm panel on an aluminium frame, so a stone door stays light enough for long drawers and tall units. Alongside: Neolith sintered stone, MDi mineral surfaces, and Tech Ceramic, porcelain layered with glass for 5 mm doors and 10 mm worktops.
Wood 10
Solid, tactile and flamed wood in oak, walnut, elm and bamboo, finished with water-based varnishes. Real wood shows knots, fine cracks and colour shifts, and is not used next to sinks and hobs.
Metal 9
Brass, copper and titanium, plus stainless steel and structured aluminium, for whole fronts or single details.
Lacquer 12
Lacquered MDF with a polyester basecoat and a polyurethane top coat, matt or gloss, and scratched lacquers with a brushed metal look.
Technical surfaces 13
Angel Skin, velvety and very matt; high-pressure laminate (HPL) for hard-working worktops; Effects with the look of wood or texture; and Tech Synthesis, Corian by DuPont in white.
Crafted drawer fronts 19
Genius Loci drawer fronts for the drawer under the worktop: copper, brass and titanium foils, marble cubes and mosaics, inlaid and carved wood, and cut glass, each worked by Italian artisans. One front can set the tone for the whole kitchen.
Profiles 4
Profile finishes in black, white, champagne and stainless steel. The profile frames the door, so choose it together with the door finish.
No finish matches. Clear the search or pick another material.
What the makers state about each material
Only what the manufacturer publishes for each finish family. Where it says nothing, the cell is left empty rather than guessed. Ask us in the showroom for the full technical sheet.
| Material | Heat | Scratches | Stains and water | Note |
|---|---|---|---|---|
| Vitrum glass | — | — | Easy to clean, colour does not change | Tempered, five times stronger than ordinary glass |
| Marble, granite, sandstone | — | — | Water- and oil-repellent treatment | Renew the stone protector once a year |
| Tech Ceramic | Resistant | Resistant, also to abrasion | Resistant | 5 mm doors, 10 mm worktops |
| Neolith | Resistant | Resistant | Waterproof | Recyclable |
| Wood | — | — | — | Not used next to sinks and hobs |
| Metal drawer fronts | — | — | — | Copper, brass and titanium foils protected by a nanotechnological coating |
| Lacquer | — | — | Good stain resistance | Light-fast colour |
| Angel Skin | — | Moderate | High, to food, oil and detergents | Very matt, velvety |
| Laminate (HPL) | Keep very hot objects off | — | Stain and chemical resistant | Suited to worktops |
| Tech Synthesis (Corian) | — | — | Non-porous, hygienic | Joins without visible seams |
— not specified by the manufacturer.
Judge the finish in your hand
Gloss, grain and texture read differently on a screen. The samples are in the Wakim Group showroom in Saifi, Beirut, next to the kitchens they belong to, for clients across Lebanon.
WhatsApp 03 258 946Finishes subject to brand and collection. Colours on screen are indicative. Images: manufacturers.